indoor cleaning robots

Indoor cleaning robots have been widely used in high-speed railway stations, airports, Grade A office buildings, commercial complexes, underground garages, industrial parks, schools, hotels, restaurants, hospitals, government buildings and other scenarios.
These robots are suitable for different floors such as ceramic tiles, PVC, marble, epoxy flooring, short haired carpets, etc., it has multiple functions such as sweeping, vacuuming, and mopping.

ClassificationParameterClassificationParameter
Basic parametersMachine size (L*W*H)520*510*278mmMobilityWelt ability5cm distance welt
Weight17.5kgMinimum passing height300mm
Running speedWorking: 0.4m/s Non-working: 0.6m/sIntelligent elevator, door operator
Cleaning abilityBattery life4hPerceptionLidar detection distanceRanging radius 30m
Charging time2hObstacle recognition
Tank volume4L clean water /3.5L sewageStain recognition
Dust box volume1.3LCarpet identification
Suction6KPa (standard) 8KPa (max)OtherNoiseMute: ≤60dB Standard: ≤65dB
Cleaning efficiency300-700㎡/hWorkstationAutomatic charging
Scrub width390mmAutomatically add clean water and sewage
MobilityGradeability10 °Mop drying
Obstacle clearance30mmCleaner

Multiple cleaning methods: Marble can be mopped dry, tiles can be wet mopped, and carpet areas can be vacuumed, wet mopping for tiles and PVC , dry mopping for wooden floors. The floor material can be automatically identified, and the vacuuming and mopping can be switched automatically ;

Various working modes: during the day, you can choose silent mode, which is quiet, and at night, you can choose full coverage standard or strong mode, for a comprehensive and deep cleaning;

A 1000m2 cleaning task can be completed with only one charge.

The robots can automaticly connect to the elevator and door through IOT to perform cross-floor cleaning tasks.The ground more than 50mm away from the glass wall and ordinary wall can be cleaned, with the help of human labor, corner cleaning will be more convenient and efficient.

With a variety of sensors to intelligently identify obstacles and operate flexibly. The minimum passable width is 700mm and the cleaning robot can freely shuttle between the workstations.The height of the robot fuselage is less than 300mm , which can be drilled into the bottom of the table for cleaning.